Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use keys or LEDs and is concealed in the wiring of the vehicle.
The user can also disable the system temporarily by using Transport Mode when renting out their car. ghost immobiliser review will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning, and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a PIN code you set. It is inaccessible to thieves using diagnostic scanners and other modern methods. It isn't able to be disabled by cutting circuits.
The system is easy to use, but it is essential to have a professional installation to ensure a smooth and secure connection with your vehicle's ECU. Installers who are approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm system to complete the protection package for your vehicle.
To prevent an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. After this is completed, the installer can safely begin work. Hand tools are essential for making precise connections, while a multimeter can be used to test electrical values and ensure safety. Insulation tape and cable tie are essential to protect connections and keep wiring tidy. The user's manual gives specific guidelines that are specifically tailored to the Ghost Immobiliser model you have.
It is important to choose a grounding location that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and can L are connected to the appropriate ECU ports. These wires can be plugged into or soldered based on the model. A high-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the customer once the installation is complete. This permits mechanics or valet parking to use the vehicle without having to know the pin code. The customer must press the icon for service on the dashboard five times over 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent option for those who regularly rents their vehicle on platforms such as Turo. An immobiliser can cut down on insurance rates, as it lowers the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser for those who want to safeguard your vehicle from theft. The device stops your car from starting if someone steals or copies your key. It is possible because of its advanced technology that prevents the engine from starting until the right PIN code has been entered.
The device connects to the CAN bus network of your vehicle and allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence that only you can identify, making it impossible for others to start your car. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact if you ever want to sell it.
Installing a ghost immobiliser is a simple process, but it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. You must first find a 12V power source and a solid grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, be sure to cover the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
Once the wires have been connected, you can connect the battery and start the engine to determine if the immobiliser is working. When everything is functioning correctly, you can install it in a secure location under the dash or elsewhere in the vehicle. Be sure to conceal it in a secure manner so that a thief cannot alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent to car thieves. It is resistant to hacking and key cloning and is not able to be disabled without the code. It is simple to use and can be set to an option for a service valet so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It connects directly to the car's CAN bus network and communicates with the ECU, making it virtually undetectable to your car. Unlike other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals and it utilizes the CAN data format to communicate with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one button) and then switch on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against key cloning or hacking while also protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to hand your car to service or valet parking.
You'll require a continuous power source (12V) and a grounding source to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This reduces the possibility of theft by potential thieves. Make sure you double-check the position of these points to avoid mistakes and mark them with an adhesive or label. Verify every connection for signs that they're getting worn out. Make sure all connections are in place, and properly insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit is operating correctly and that all connections are safe and well-insulated. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to stop the motor from starting without authorization. Its innovative technology safeguards your vehicle against key cloning and hacking and other common methods employed by thieves to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective security for your vehicle. This system's unmatched features and secluded design make it a popular choice for car lovers and security-conscious drivers too.
It is crucial to follow the steps of installation to ensure the complete integration of the Ghost Immobiliser. A good starting point is to refer to the vehicle's wiring diagram that will serve as a guideline to locate and connecting the necessary wires. The next step is to determine the power and grounding sources. Once you've located them, you'll have to mark them to make them easily identifiable when installing. It's essential to use high-quality materials and tools. Basic hand tools will aid in making precise connections. A multimeter will check electrical values, and also ensure safety. Insulation tape and cable ties will help keep all connections tidy and neat. A Ghost-specific user manual is also available.
It is essential to test the system before installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser works as intended, preventing unauthorised vehicle starts. This step should be done regularly as part your regular inspections of your vehicle to ensure the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your car with confidence. The Ghost will help keep your precious possessions safe from potential thieves and ensure that nobody is able to drive off with your vehicle without the correct PIN. The Ghost can also be linked with a Thatcham-approved tracker to detect any attempts at tampering or theft, allowing you to locate your vehicle in the event of it being stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with the majority of major brands. If you're looking to secure your vehicle with this innovative device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA Registered installer which guarantees that we adhere to the strictest guidelines and procedures when installing our products. This reassures customers, insurers, and law enforcement that all installations are performed safely and correctly.